MPU250-Power Submodule

The MPU250-Power submodule is used to extend the system by adding further 250 luminaires. 13 additional external modules can be installed. The unit is designed for mounting on TH30 (DIN). The submodule communicates with the RUBIC UNA (or RUBIC UNA WIRELESS) control unit via an Ethernet network, so it is necessary to connect it to the structural network of the building or to a special network dedicated to the system. The module requires that the IP address be changed to a non-factory IP address for proper operation. Each MPU250-Power module must have a distinct IP address. 
 

Technical Parameters
AC supply voltage	230 V 50/60 Hz
Fuse	TR5 T 2.5 A; 250 V at 230 V input TR5 T 2.5 A; 250 V at battery connector
Current rating	~ 100 mA
Mounting	DIN rail
Operating temperature	0 °C ÷ 40 °C
Storage temperature	-5 °C ÷ 40 °C
Humidity	20% ÷ 90% without water vapour condensation
Protection class	II
IP rating	IP21
Dimensions	210 mm x 90 mm x 58 mm
Internal battery	LiFePO4; 12.8 V; 1 Ah
IP address (default)	192.168.137.5
Width (number of slots)	12 seats (12x 17.5 mm)