MPW250-Power Submodule

MPW250-Power slave module is used to expand the system by another 250 luminaires. An additional 3 external modules can be installed. The device is adapted for mounting on a TH35 (DIN) rail. It is powered by 230 V AC, additionally it has a built-in battery for continuous operation after a power outage. The device communicates with the RUBIC UNA WIRELESS control panel by means of an internal communication protocol using LAN and RJ45 connector located at the bottom of the housing. Communication with luminaires is realized by RS485 communication, wiring can be connected to two parallel channels.
 

Technical data
AC supply voltage	230 V 50/60 Hz
Fuse	TR5 T 2.5 A; 250 V at 230 V input TR5 T 2.5 A; 250 V at battery connector
Power consumption	~ 100 mA
Mounting	DIN rail
Operating temperature	0 °C ÷ 40 °C
Storage temperature	-5 °C ÷ 40 °C
Humidity	20% ÷ 90% without water vapour condensation
Protection class	II
IP rating	IP21
Dimensions	210 mm x 90 mm x 58 mm
Internal battery	LiFePO4; 12.8 V; 1 Ah
IP address (default)	192.168.137.5
Width (number of slots)	12 slots (12 x 17.5 mm)